Synthesis and Characterization of Zirconia Nanoparticles with Mixed Ligand Shells by Solid-state NMR Methods and Dispersions of Polymer Functionalized Gold Nanoparticles in Nematic Liquid Crystals

Synthesis and Characterization of Zirconia Nanoparticles with Mixed Ligand Shells by Solid-state NMR Methods and Dispersions of Polymer Functionalized Gold Nanoparticles in Nematic Liquid Crystals
Author: Safiya Allie
Publisher:
Total Pages:
Release: 2016
Genre:
ISBN:

Download Synthesis and Characterization of Zirconia Nanoparticles with Mixed Ligand Shells by Solid-state NMR Methods and Dispersions of Polymer Functionalized Gold Nanoparticles in Nematic Liquid Crystals Book in PDF, Epub and Kindle

" This thesis concerns the characterization of nanoparticles and liquid crystal nanocomposites. Two types of nanoparticles were prepared: zirconia nanoparticles were functionalized with different ratios of dodecyl- and phenyl- phosphonic acids as a model system for developing a NMR-based characterization method to determine the spatial distribution of the ligands. This study was motivated by the finding that successful dispersions of nanoparticles in liquid crystals often requires mixed ligand shells and it assumed that there is a homogeneous distribution of the two ligands. Secondly, more readily prepared polymer functionalized gold nanoparticles were tested as an alternative to mixed ligand shells of low molar mass mesogenic ligands to achieve stable dispersions in a nematic liquid crystal. Spin diffusion NMR experiments developed for heterogeneous polymeric materials were used as a novel surface characterization method for nanoparticles with mixed ligand shells. 1D solid-state 31P and 1H NMR spectroscopy, respectively used to characterize the surface binding and ligand shell composition, showed that the compositions of the strongly bound ligand shells matched the reaction ratios. The spatial proximities of the dodecyl and phenyl groups were probed by 2D 1H-13C Heteronuclear Correlation (HETCOR) and 1H Double Quantum (DQ) NMR experiments. The HETCOR and 1H DQ NMR experiments indicate a significant population of dodecyl- and phenyl- phosphonic acids are nearest neighbors which would be consistent with molecular level mixing on the nanoparticle surface. However the proton spin diffusion experiments indicate the presence of some type of phase separation. This finding is significant since previous studies of mixed phosphonic acid monolayers in the literature assume a homogeneous distribution. The analysis of the spin diffusion build up curves yielded domain sizes on the order of ~ 4-5 nm which appear to be too large given the nanoparticle dimensions. Control experiments point towards an overestimate of the spin diffusion coefficients since these experiments were originally developed for the extended proton-proton dipolar coupling networks found in polymers. Gold nanoparticles, AuNPs, functionalized with 2000 MW thiolated poly(ethylene oxide), PEO-SH, were dispersed in a common nematic liquid crystal, 4-cyano-4'-pentylbiphenyl (5CB). Dispersions of free PEO, 2000 MW, in 5CB were also prepared. The two types of blends were characterized by polarized optical microscopy (POM) and differential scanning calorimetry (DSC). Relatively high concentrations of 10 wt. %, 20 wt. % and 50 wt. % AuNPs-PEO in 5CB were investigated. The dispersions were all characterized by POM by cooling from the isotropic state to erase all thermal history. Both the AuNP-PEOs and PEO alone are completely miscible in isotropic 5CB to very high concentrations. Whereas the free PEO significantly lowers the isotropic to nematic (I-N) phase transition temperature of 5CB, the AuNP-PEOs only cause a small change, similar to previously studied AuNPs with mesogenic ligands. Below the I-N transition, both the polymer and AuNP dispersions display a biphasic state over a wide temperature range. For higher concentrations (> 10 wt. % PEO), PEO spherulite crystallization nucleates the nematic phase of 5CB. At lower PEO concentrations, the I-N transition of 5CB precedes PEO crystallization which shows a dendritic morphology. The AuNP-PEOs form a cellular network which shares similarities with that formed by AuNPs with mesogenic ligands. Differences in the network morphologies are attributed to the stronger disordering effect of the polymer ligands on the nematic structure as compared to the mesogenic ligands. " --

Colloidal Metal Oxide Nanoparticles

Colloidal Metal Oxide Nanoparticles
Author:
Publisher: Elsevier
Total Pages: 608
Release: 2019-10-16
Genre: Technology & Engineering
ISBN: 0128133589

Download Colloidal Metal Oxide Nanoparticles Book in PDF, Epub and Kindle

Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization

Synthesis and Characterization of Zirconia Coated Silica Nanoparticles for Catalytic Reactions

Synthesis and Characterization of Zirconia Coated Silica Nanoparticles for Catalytic Reactions
Author:
Publisher:
Total Pages:
Release:
Genre:
ISBN:

Download Synthesis and Characterization of Zirconia Coated Silica Nanoparticles for Catalytic Reactions Book in PDF, Epub and Kindle

Silica nanoparticles and zirconia coated silica nanoparticles were prepared by Stober method.and various subsequent methods. The nanoparticles obtained were characterized by XRD, SEM, EDAX and IR analytical techniques. The XRD study of pure ZrO2 shows well crystalline characteristics with the presence of 100% monoclinic phase. The coated nanoparticles are found to be amorphous in nature. SEM study indicate the particles to possess disorder morphology with the particle are attached to each other through grain boundary to form agglomerated structure. The zirconia coated silica nanoparticles were used as a efficient catalyst for the synthesis of Bis(indolyl) methane under solvent free condition. The Bis(indolyl) methane were obtained with high yield and purity.

In-situ Preparation of Polymer-Coated Zirconia Nanoparticles by Decomposition of Zirconium-Tert-Butoxide

In-situ Preparation of Polymer-Coated Zirconia Nanoparticles by Decomposition of Zirconium-Tert-Butoxide
Author: Michael Schallehn
Publisher:
Total Pages: 7
Release: 2003
Genre:
ISBN:

Download In-situ Preparation of Polymer-Coated Zirconia Nanoparticles by Decomposition of Zirconium-Tert-Butoxide Book in PDF, Epub and Kindle

Nanocrystalline zirconia particles coated with polymers have been prepared by a two step Chemical Vapor Synthesis process using a hot wall reactor to synthesize the nanocrystalline ceramic core and a subsequent RF plasma reactor for the polymer coating. The polymer coating is built up of organic byproducts of the pyrolysis of the zirconia precursor. By using continuous and pulsed plasma deposition and variation of the plasma parameters such as RF power, period and duty-cycle the structure and thickness of the polymer coating can be influenced. Typical particle radii are in the range of 3 to 4 nm with radii of the ceramic core in the range of 2 nm and a coating thickness in the range of 1 to 2 nm. The powders have been characterized by FT-IR, XRD, BET and HRTEM. Consequences for the dispersibility are reported.

Synthesis and Characterization of Core/shell Hydrogel Nanoparticles and Their Application to Colloidal Crystal Optical Materials

Synthesis and Characterization of Core/shell Hydrogel Nanoparticles and Their Application to Colloidal Crystal Optical Materials
Author: Jonathan G. McGrath
Publisher:
Total Pages: 236
Release: 2007
Genre:
ISBN:

Download Synthesis and Characterization of Core/shell Hydrogel Nanoparticles and Their Application to Colloidal Crystal Optical Materials Book in PDF, Epub and Kindle

This dissertation describes the use of spherical core/shell type micro- and nanoparticles as building blocks for the fabrication of colloidal crystals. The polymer component used in all of the projects that are described herein is poly-N-isopropylacrylamide (pNIPAm). The polymeric identity of particles composed of this soft, hydrogel material, which is also thermoresponsive, contributes to the self-assembly of such particles to form ordered structures. Chapter 2 examines a characterization technique using fluorescence resonance energy transfer (FRET) to investigate the structure of particles that possess a core/shell topology. Chapters 4-6 investigate strategies to impart both hard (dense core) and soft (flexible shell) properties to the particles by using styrene as the main component in a copolymer synthesis with pNIPAm (pS- co-NIPAm particles). The resulting crystal assemblies, which could be formed by simple drying procedures, were demonstrated to be robust and their application as processable, photonic inks is also investigated. Chapter 7 examines the ability to crosslink these crystals together by simple heating methods to produce robust films, and the optical properties of these crystal films could be tuned by simple rehydration. Chapters 3 and 5 examine the synthesis and self-assembly strategies of core/shell particles using the properties of pNIPAm shell layers that have been added to different types of core particles (silver or pS-co-NIPAm) for the purposes of fabricating colloidal crystals using thermal annealing procedures. Chapter 8 explores the use of silver particles as tracers for the characterization of colloidal crystals composed of thermally annealed colloidal crystals composed of pNIPAm hydrogel particles.

Synthesis and Characterization of Functionalized Zirconium Pendent Polyamic Acids and Polyimides Based on 3,4'-ODN and ODPA

Synthesis and Characterization of Functionalized Zirconium Pendent Polyamic Acids and Polyimides Based on 3,4'-ODN and ODPA
Author: Wei Wang
Publisher:
Total Pages: 170
Release: 2000
Genre: Polyamides
ISBN:

Download Synthesis and Characterization of Functionalized Zirconium Pendent Polyamic Acids and Polyimides Based on 3,4'-ODN and ODPA Book in PDF, Epub and Kindle

"The objective of this thesis is to synthesize functionalized zirconium complex pendent polyamic acids and polyimides, then compare their characteristics, e.g. thermal properties, atomic oxygen resistence, and film properties."--Abstract.

Synthesis and Characterization of Transition Metal Nitride and Selenide Nanocrystals and Heterostructures

Synthesis and Characterization of Transition Metal Nitride and Selenide Nanocrystals and Heterostructures
Author: Robert William Lord
Publisher:
Total Pages:
Release: 2021
Genre:
ISBN:

Download Synthesis and Characterization of Transition Metal Nitride and Selenide Nanocrystals and Heterostructures Book in PDF, Epub and Kindle

The properties of nanomaterials are intimately dependent on their size, morphology, composition both elemental and structural, as well as their crystal structure or atomic arrangement. There exists a fundamental need to develop methods to precisely control and tune these parameters in order to target desirable materials. Colloidal chemistries utilize wet chemical precursors to synthesize inorganic nanomaterials from the bottom up and produce high quality materials. In addition to single component material synthesis, colloidal chemistries have been developed to synthesize multicomponent nanomaterials systems through a process called seeded growth. Seeded growth utilizes preformed nanoparticles as substrates to nucleate and grow new materials from their surfaces. This has led to the synthesis of highly complex heterostructured nanoparticles which allow for the incorporation of multiple material properties within single particle frameworks. While these techniques can control the structure and composition of the synthesized material, they do not allow for as much control over the resulting crystal structure. Other methods have been developed which allow for crystallographic templating and compositional modulation by post-synthetic cation exchange. Cation exchange utilizes molecular agents to solvate and exchange host cations in preformed crystals with those in solution while maintaining the anion sublattice relatively unperturbed. The crystallographic symmetry of the anion sublattice determines the symmetry of the final product phase. As such, cation exchange has allowed researchers to synthesize materials which are either metastable in bulk or not easily assessable through other methods. In this dissertation I discuss my efforts to utilize these synthetic tools to synthesize new and complex inorganic nanoparticles. First, I describe the seeded growth of Cu3N and Cu3PdN on Pt and Au nanocrystals. Utilizing Pt-Cu3PdN as the model system, it was observed that Cu3PdN nucleated and grew in a step-wise pathway with the initial deposition of Cu onto the surface. This was followed by the deposition of Pd onto the corners and edges of the Pt nanocubes which was followed by the coalescence and crystallization of Cu with the Pd to ultimately give Cu3PdN. When nucleating on more faceted or spherical seeds, whether Pt or Au, the resulting heterostructures took on more core@shell structures. In the absence of Pd, Cu3N nucleates indiscriminately on the surface of Pt without any of the regioselectivity seen with Cu3PdN. When utilizing Au seeds, AuCu alloy formation is observed without any apparent heterostructure formation. These observations helped us develop guidelines which are anticipated to be applicable to the formation of other ternary nitride heterostructures. Second, I discuss the synthesis of a new, metastable phase of copper selenide nanoparticles. This material was shown by EDS and XPS to adopt a nominally 2:1 stoichiometry and the XRD pattern did not match any known phase of Cu2-xSe. However, the nanoparticles did adopt a crystal structure similar to previously observed weissite Cu2-xTe. A structural model for our Cu2-xSe phase was developed utilizing a recently reported structural model for weissite Cu2-xTe which was computationally verified in collaboration with Professor Ismaila Dabo's group. Weissite-like Cu2-xSe has trigonal symmetry (space group P ̄3 m1) and is a layered structure with alternative Cu-rich and Cu-deficient layers sandwiched between layers of Se. UV-vis-NIR spectroscopy of weissite-like Cu2-xSe showed a broad plasmon absorbance band centered around 1550 nm. Lastly, I discuss my efforts to develop synthetic guidelines for the competitive synthesis of ternary copper selenide phases during their nucleation on Pt nanoparticle seeds. We showed experiments which allude to two potential synthetic pathways for the formation of CuFeSe2 and CuInSe2. It was observed that the CuInSe2 forms through a multistep pathway starting with the initial nucleation of Cu2-xSe followed by the incorporation of the In3+ through a high temperature cation exchange reaction. However, CuFeSe2 was shown to most likely to form by direct nucleation. The differences in these reactions were observed when their simultaneous nucleation was attempted, where only Pt--CuIn¬Se2 formed.