Laminar Boundary-Layer Instabilities on Hypersonic Cones: Computations for Benchmark Experiments

Laminar Boundary-Layer Instabilities on Hypersonic Cones: Computations for Benchmark Experiments
Author:
Publisher:
Total Pages: 19
Release: 2005
Genre:
ISBN:

Download Laminar Boundary-Layer Instabilities on Hypersonic Cones: Computations for Benchmark Experiments Book in PDF, Epub and Kindle

Although significant advances have been made in hypersonic boundary-layer transition prediction in the last several decades, most design work still relies on empirical correlations or wind tunnel tests. Codes using the semi-empirical eN method will need to be verified and validated before being used for expensive flight vehicles. The STABL code package and its PSE-Chem stability solver are used to compute first and second mode instabilities for both sharp and blunt cones at wind tunnel conditions, with laminar mean flows provided by the DPLR2D Navier-Stokes code. Stetson's 3.81 mm blunt cone case, a sharp cone at Mach 3.5, and a very blunt cone at Mach 8 are analyzed. The computed transition locations agree well with previous computations by other researchers, but larger differences are seen in the local amplification rates for the Stetson blunt cone case. the applicability of various transport property models and their effect on boundary layer stability are examined. This work helps to extend the applicability of STABL to low-temperature flows.

Investigation of the Development of Laminar Boundary-Layer Instabilities Along a Cooled-Wall Cone in Hypersonic Flows

Investigation of the Development of Laminar Boundary-Layer Instabilities Along a Cooled-Wall Cone in Hypersonic Flows
Author: J. C. Donaldson
Publisher:
Total Pages: 51
Release: 1988
Genre:
ISBN:

Download Investigation of the Development of Laminar Boundary-Layer Instabilities Along a Cooled-Wall Cone in Hypersonic Flows Book in PDF, Epub and Kindle

Measurements of fluctuating flow and mean flow parameters were made in the boundary layer on a cooled wall, sharp 7-deg (half-angle) cone in an investigation of wall temperature effects on the stability of laminar boundary layers in hypersonic flow. The flow fluctuation measurements were made using constant-current hot-wire anemometry techniques. Boundary-layer profiles and cone surface conditions were measured to supplement the hot-wire data. Testing was done at Mach numbers 8 and 6 with a free-stream unit Reynolds number of 1.0-million per foot. The test equipment, test techniques, and the data acquisition and reduction procedures are described. Analysis of the hot wire anemometer data is beyond the scope of this report. Hypersonic flow, Wind tunnel tests, Cold wall model, Boundary layer stability, Hot wire anemometry, Sharp cone. (mjm).

Three-dimensional Laminar Boundary-layer Analysis of Upwash Patterns and Entrained Vortex Formation on Sharp Cones at Angle of Attack

Three-dimensional Laminar Boundary-layer Analysis of Upwash Patterns and Entrained Vortex Formation on Sharp Cones at Angle of Attack
Author: John C. Adams (Jr.)
Publisher:
Total Pages: 124
Release: 1971
Genre: Aerodynamics, Hypersonic
ISBN:

Download Three-dimensional Laminar Boundary-layer Analysis of Upwash Patterns and Entrained Vortex Formation on Sharp Cones at Angle of Attack Book in PDF, Epub and Kindle

Application of three-dimensional inviscid and viscous (laminar boundary layer) analyses for cold wall hypersonic flows over sharp cones at incidence is presented relative to experimental data, showing surface upwash angles and entrained vortex formation leading to crossflow-induced boundary-layer transition. Three-dimensional neutral inviscid stability theory for stationary disturbances is used to calculate the angular orientation of the entrained vortices in the boundary layer while a maximum crossflow Reynolds number concept is applied for correlation of the onset to vortex formation due to crossflow instability.

Hypersonic Boundary-Layer Stability Experiments on a Flared-Cone Model at Angle of Attack in a Quiet Wind Tunnel

Hypersonic Boundary-Layer Stability Experiments on a Flared-Cone Model at Angle of Attack in a Quiet Wind Tunnel
Author: National Aeronautics and Space Adm Nasa
Publisher:
Total Pages: 134
Release: 2018-11-18
Genre:
ISBN: 9781731266217

Download Hypersonic Boundary-Layer Stability Experiments on a Flared-Cone Model at Angle of Attack in a Quiet Wind Tunnel Book in PDF, Epub and Kindle

An experimental investigation of the effects of angle of attack on hypersonic boundary-layer stability on a flared-cone model was conducted in the low-disturbance Mach-6 Nozzle-Test Chamber Facility at NASA Langley Research Center. This unique facility provided a 'quiet' flow test environment which is well suited for stability experiments because the low levels of freestream 'noise' minimize artificial stimulation of flow-disturbance growth. Surface pressure and temperature measurements documented the adverse-pressure gradient and transition-onset location. Hot-wire anemometry diagnostics were applied to identify the instability mechanisms which lead to transition. In addition, the mean flow over the flared-cone geometry was modeled by laminar Navier-Stokes computations. Results show that the boundary layer becomes more stable on the windward ray and less stable on the leeward ray relative to the zero-degree angle-of-attack case. The second-mode instability dominates the transition process at a zero-degree angle of attack, however, on the windward ray at an angle of attack this mode was completely stabilized. The less-dominant first-mode instability was slightly destabilized on the windward ray. Non-linear mechanisms such as saturation and harmonic generation are identified from the flow-disturbance bispectra. Doggett, Glen P. and Chokani, Ndaona Langley Research Center ANGLE OF ATTACK; AERODYNAMIC NOISE; ZERO ANGLE OF ATTACK; BOUNDARY LAYER STABILITY; HYPERSONIC SPEED; NAVIER-STOKES EQUATION; HYPERSONICS; AERODYNAMIC STABILITY; HYPERSONIC BOUNDARY LAYER; WIND TUNNELS; VELOCITY MEASUREMENT; TEST CHAMBERS; LOW NOISE...

One Small Step

One Small Step
Author: A. F. Grandt Jr.
Publisher: Purdue University Press
Total Pages: 500
Release: 2019-07-15
Genre: Technology & Engineering
ISBN: 1557539146

Download One Small Step Book in PDF, Epub and Kindle

Purdue University has played a leading role in providing the engineers who designed, built, tested, and flew the many aircraft and spacecraft that so changed human progress during the 20th century. It is estimated that Purdue has awarded 6% of all BS degrees in aerospace engineering, and 7% of all PhDs in the United States during the past 65 years. The University's alumni have led significant advances in research and development of aerospace technology, have headed major aerospace corporations and government agencies, and have established an amazing record for exploration of space. More than one third of all US manned space flights have had at least one crew member who was a Purdue engineering graduate (including the first and last men to step foot on the moon). The School of Aeronautics & Astronautics was founded as a separate school within the College of Engineering at Purdue University in 1945. The first edition of this book was published in 1995, at the time of the school's 50th anniversary. This corrected and expanded second edition brings the school's illustrious history up to date, and looks to Purdue's future in the sky and in space.

Investigation of the Development of Laminar Boundary-Layer Instabilities Along a Sharp Cone

Investigation of the Development of Laminar Boundary-Layer Instabilities Along a Sharp Cone
Author: J. C. Donaldson
Publisher:
Total Pages: 62
Release: 1985
Genre:
ISBN:

Download Investigation of the Development of Laminar Boundary-Layer Instabilities Along a Sharp Cone Book in PDF, Epub and Kindle

Measurements of mean-flow and fluctuating-flow parameters were made in the boundary layer on a sharp 7-deg cone in an investigation of the stability of laminar boundary layers. The flow fluctuation measurements were made using hot-wire anemometry techniques. Flow field profiles and model surface conditions were also measured. The testing was performed at a free-stream Mach number of 8 for free-stream Unit-Reynolds numbers of 1.0-, 2.0-, and 3.0-million per foot. The test equipment and techniques and the data acquisition and reduction procedures are described. Analysis of the hot-wire anemometer data is beyond the scope of this report. Keywords: Hypersonic/flow; Sharp cones; Wind tunnel tests; Boundary-layer stability.

An Experimental Investigation of Wall-Cooling Effects on Hypersonic Boundary-Layer Stability in a Quiet Wind Tunnel

An Experimental Investigation of Wall-Cooling Effects on Hypersonic Boundary-Layer Stability in a Quiet Wind Tunnel
Author: Alan E. Blanchard
Publisher:
Total Pages: 120
Release: 1996
Genre: Aerodynamics, Hypersonic
ISBN:

Download An Experimental Investigation of Wall-Cooling Effects on Hypersonic Boundary-Layer Stability in a Quiet Wind Tunnel Book in PDF, Epub and Kindle

One of the primary reasons for developing quiet tunnels is for the investigation of high-speed boundary-layer stability and transition phenomena without the transition-promoting effects of acoustic radiation from tunnel walls. In this experiment, a flared-cone model under adiabatic- and cooled-wall conditions was placed in a calibrated, "quiet" Mach 6 flow and the stability of the boundary layer was investigated using a prototype constant-voltage anemometer. The results of this experiment were compared with linear-stability theory predictions and good agreement was found in the prediction of second-mode frequencies and growth. In addition, the same "N = 10" criterion used to predict boundary-layer transition in subsonic, transonic, and supersonic flows was found to be applicable for the hypersonic flow regime as well. Under cooled-wall conditions, a unique set of continuous spectra data was acquired that documents the linear, nonlinear, and breakdown regions associated with the transition of hypersonic flow under low-noise conditions