An Experimental Study of Slot Injection Into a Supersonic Stream

An Experimental Study of Slot Injection Into a Supersonic Stream
Author: Michael Kenworthy
Publisher:
Total Pages: 52
Release: 1973
Genre: Aerodynamics, Supersonic
ISBN:

Download An Experimental Study of Slot Injection Into a Supersonic Stream Book in PDF, Epub and Kindle

An experimental investigation of two-dimensional tangential-slot injection into a turbulent boundary layer at a freestream Mach number of 2.4 has been conducted. Nearly adiabatic surface temperatures were maintained during all tests. Static and pitot pressure profiles at four stations downstream of the slot were obtained. Skin friction was measured at the last three stations with a self-nulling balance. Schlieren photographs of the flow field were also obtained. Most of the data were obtained with slot Mach numbers of 0.31 and 0.66 corresponding to slot pressure less than and equal to stream static pressure, respectively. For the latter matched-pressure case, tangential slot injection reduced the surface shear at the three measuring stations by about 60 to 20 percent for increasing downstream distances from the slot of 12 to 28 slot heights. However, for the other case where slot pressure was less than stream static pressure, the effect of injection was to increase the shear by about 90 percent at the last downstream station of 28 slot heights. This increase in shear is attributed to the rapid acceleration of the low speed injectant stream by the high speed main stream and the increasing pressure through the recompression zone which is absent for the matched pressure case.

An Experimental Investigation of Thrust Vector Control by Secondary Injection

An Experimental Investigation of Thrust Vector Control by Secondary Injection
Author: Richard D. Guhse
Publisher:
Total Pages: 130
Release: 1965
Genre: Injections
ISBN:

Download An Experimental Investigation of Thrust Vector Control by Secondary Injection Book in PDF, Epub and Kindle

An experimental investigation was conducted to examine the flow field produced when a secondary gas is injected into a supersonic primary stream. A preliminary analytical investigation revealed that several parameters (such as the primary and secondary gas properties, flow conditions and geometrical parameters) were influential in determining the nature of the flow field produced by secondary injection and the resulting side force. The investigation reported herein is concerned with the results of a systematic variation of these parameters. Experiments were conducted in a Mach 2.0, two-dimensional blow down wind tunnel utilizing air as the primary and secondary gases. The secondary gas was injected through a rectangular slot extending the width of the primary nozzle. The area of the slot was varied from 1/2% to 10% of the primary nozzle throat area in five increments. For each value of slot area the secondary to primary stagnation pressure ratio was varied from 0.301 to 1.175 in six increments. The experiments were conducted for injection normal to the nozzle axis and at an angle of 10 degree upstream of this normal at an axial position where the primary Mach number was 1.90. In each case preliminary diagnostic investigations (optical) were conducted to determine the nature of the flow field.

Masters Theses in the Pure and Applied Sciences

Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
Total Pages: 341
Release: 2012-12-06
Genre: Science
ISBN: 1461559693

Download Masters Theses in the Pure and Applied Sciences Book in PDF, Epub and Kindle

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this jOint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 40 (thesis year 1995) a total of 10,746 thesis titles from 19 Canadian and 144 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 40 reports theses submitted in 1995, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

An Experimental Investigation of the Supersonic Turbulent Boundary Layer in a Moderate Adverse Pressure Gradient. Part II. Analysis of the Experimental Data

An Experimental Investigation of the Supersonic Turbulent Boundary Layer in a Moderate Adverse Pressure Gradient. Part II. Analysis of the Experimental Data
Author: W. B. Sturek
Publisher:
Total Pages: 58
Release: 1971
Genre:
ISBN:

Download An Experimental Investigation of the Supersonic Turbulent Boundary Layer in a Moderate Adverse Pressure Gradient. Part II. Analysis of the Experimental Data Book in PDF, Epub and Kindle

The experimental data reported in Part 1 are analyzed. Turbulent boundary layer equations applicable to compressible flow over a surface with longitudinal curvature are evaluated by numerical integration using the tabulated profile data. Curvature corrections to the equation for conservation of streamwise momentum are shown to be small but of the same order of magnitude as the wall shear stress. The data are shown to correlate in law of the wall and velocity defect dimensionless coordinates using an integral compressibility transformation. Values of skin friction coefficient calculated using the experimental data are compared to other experimental data and to values predicted using the Spalding-Chi method. (Author).