Developments in Crystalline Polymers—1

Developments in Crystalline Polymers—1
Author: David C. Bassett
Publisher: Springer Science & Business Media
Total Pages: 283
Release: 2013-04-17
Genre: Technology & Engineering
ISBN: 9400973438
GET BOOK

Download Developments in Crystalline Polymers—1 Book in PDF, Epub and Kindle

Crystalline or, more properly, semi-crystalline polymers continue to present major challenges and opportunities to scientists and technologists alike. On the one hand, scientific understanding of their structure and properties still lags behind that of other economically important, but less complicated materials. On the other hand, there remains very considerable potential for improving properties in systems designed for specific pur poses. Ways are only just being found of transferring inherent molecular properties (such as high modulus) to the macromolecular solid. Beyond these are many possibilities of manipulating the organization of chemical and physical textures towards desired ends. The chapters in this volume are reports, by wen-known and active researchers, on some of the important recent developments ofthese themes. Grubb begins with the fundamental and central problem of determining polymeric microstructure. Polymers sutTer by comparison with other materials in that it has not generany been possible to exploit the high resolution of the electron microscope to determine their microstructure in adequate detail. However, recently, ways have been found of studying representative lamellar textures in melt-crystallized polymers. When fully exploited these must add greatly to our detailed knowledge and provide a firmer fundamental base for future developments. Radiation damage bears the primary responsibility for restricting electron microscopy. In his chapter, Kener recounts how appreciation of this fact led him into a fascinating study of ever deeper aspects of radiation damage in polyethylene over two decades, often controversiany but invariably clarifying the basic understanding of an area now of increasing commercial importance.

Developments in Crystalline Polymers—2

Developments in Crystalline Polymers—2
Author: David C. Bassett
Publisher: Springer Science & Business Media
Total Pages: 351
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 9400913419
GET BOOK

Download Developments in Crystalline Polymers—2 Book in PDF, Epub and Kindle

Modern society makes increasing demands for novelty in materials and their properties which are ever more exacting. Crystalline polymers are in the forefront of this demand and improvements are constantly occurring across the entire range from existing materials of high tonnage to novel materials with application in information technology. The developments recorded in this volume reflect this situation. Chapter 1 is a comprehensive review of the polymer PHB, poly(hydroxybutyrate), which is new to industrial manufacturing but is a naturally occurring substance. It has potentially valuable properties but has excited interest especially because it is biodegradable. It may, therefore, provide one means of reducing environmental pollution. Improvements in existing materials, beyond those which are ob tainable by optimization of known variables, are most likely to come from understanding of structure-property relationships. Polymer is able to make effective science has now reached the stage where it synthesis of information from complementary techniques, leading to rapidly deepening understanding. Chapters 2, 3 and 4 are all con cerned with technical developments which are contributing substan tially to this synthesis. The possibilities of electron microscopy, specifically the characterization of lamellar microstructure, have been transformed by permanganic etching. Now real organization (which can be very different from what had previously been inferred) can be used as a basis for explaining polymeric properties. In Chapter 3, Mitchell and Windle give a critical account of the assessment of orientation in liquid crystalline polymers, a rapidly developing new field in which they have played a leading part.

Recent Advances in Liquid Crystalline Polymers

Recent Advances in Liquid Crystalline Polymers
Author: L. L. Chapoy
Publisher: Springer Science & Business Media
Total Pages: 334
Release: 2012-12-06
Genre: Science
ISBN: 9400949340
GET BOOK

Download Recent Advances in Liquid Crystalline Polymers Book in PDF, Epub and Kindle

This volume contains an eclectic collection of 22 papers on liquid crystalline polymers presented at the Sixth Polymer Workshop, in the series sponsored by the European Science Foundation, entitled: 'Liquid Crystal Polymer Systems', in Gentofte, Denmark, 12-14 September 1983. Since a contribution to this volume was strictly voluntary, and in some cases represents a considerably expanded version of that which was presented, it is strictly speaking not correct to term this a 'proceedings'. A description of the aims and purposes of the European Science Foundation with respect to the polymer area has been presented in: Shell Polymers, Vol. 5, No.2, pp. 34-35, 1981. The papers given here represent a cross-section of current research interests in liquid crystalline polymers in the areas of theory, synthesis, characterization, structure-property relationships and applications. At least some of the current interest is motivated by attempts to practically exploit the novel properties of these materials in the developing tech nologies of high strength fibres and advanced materials for constructional purposes, but also for functional materials in the areas of information retrieval, electronics and opto-electronics applications. The editor wishes to thank all those involved for their courtesy and co-operation.

Developments in Oriented Polymers—2

Developments in Oriented Polymers—2
Author: Ian M. Ward
Publisher: Springer Science & Business Media
Total Pages: 284
Release: 2012-12-06
Genre: Science
ISBN: 9400934270
GET BOOK

Download Developments in Oriented Polymers—2 Book in PDF, Epub and Kindle

The last four years since the publication of the first of this series have seen further striking developments in both the science and technology of oriented polymers. In particular, polymers possessing very high degrees of molecular orientation are now quite commonplace, and this is reflected by the inclusion of five chapters dealing with ultra-high modulus polyethylene fibres, oriented liquid crystalline polymers (both lyotropics and thermo tropics) and polydiacetylene single crystal fibres. At the same time there is continuing interest in the structure and properties of less highly oriented polymers and in the mechanisms of deformation in polymers. It is therefore good to have these themes represented also. I should like to thank the contributors for adhering to a rather tight time schedule, and the publishers for their cooperation, so that this book can provide up-to-date reviews of the state of the art in a rapidly moving area of polymer science. I. M. WARD v CONTENTS Preface.... . . . .. . . . . .. ... . . . . . . . . . .. . . .. . . . . . . ... ... v List of Contributors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX 1. Polymer Single Crystal Fibres ........................ .

Polymer Crystallization

Polymer Crystallization
Author: Jerold M. Schultz
Publisher:
Total Pages: 312
Release: 2001
Genre: Science
ISBN:
GET BOOK

Download Polymer Crystallization Book in PDF, Epub and Kindle

Table of contents

Crystallization in Multiphase Polymer Systems

Crystallization in Multiphase Polymer Systems
Author: Sabu Thomas
Publisher: Elsevier
Total Pages: 612
Release: 2017-09-15
Genre: Technology & Engineering
ISBN: 0128094311
GET BOOK

Download Crystallization in Multiphase Polymer Systems Book in PDF, Epub and Kindle

Crystallization in Multiphase Polymer Systems is the first book that explains in depth the crystallization behavior of multiphase polymer systems. Polymeric structures are more complex in nature than other material structures due to their significant structural disorder. Most of the polymers used today are semicrystalline, and the subject of crystallization is still one of the major issues relating to the performance of semicrystalline polymers in the modern polymer industry. The study of the crystallization processes, crystalline morphologies and other phase transitions is of great significance for the understanding the structure-property relationships of these systems. Crystallization in block copolymers, miscible blends, immiscible blends, and polymer composites and nanocomposites is thoroughly discussed and represents the core coverage of this book. The book critically analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale. Various experimental techniques used for the characterization of polymer crystallization process are discussed. Written by experts in the field of polymer crystallization, this book is a unique source and enables professionals and students to understand crystallization behavior in multiphase polymer systems such as block copolymers, polymer blends, composites and nanocomposites. Covers crystallization of multiphase polymer systems, including copolymers, blends and nanocomposites Features comprehensive, detailed information about the basic research, practical applications and new developments for these polymeric materials Analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale

Mechanical Properties and Testing of Polymers

Mechanical Properties and Testing of Polymers
Author: G.M. Swallowe
Publisher: Springer Science & Business Media
Total Pages: 313
Release: 2013-04-17
Genre: Science
ISBN: 9401592314
GET BOOK

Download Mechanical Properties and Testing of Polymers Book in PDF, Epub and Kindle

This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.