Activated Sludge - 100 Years and Counting

Activated Sludge - 100 Years and Counting
Author: David Jenkins
Publisher: IWA Publishing
Total Pages: 460
Release: 2014-05-31
Genre: Science
ISBN: 178040493X
GET BOOK

Download Activated Sludge - 100 Years and Counting Book in PDF, Epub and Kindle

Activated Sludge - 100 Years and Counting covers the current status of all aspects of the activated sludge process and looks forward to its further development in the future. It celebrates 100 years of the Activated Sludge process, from the time that the early developers presented the seminal works that led to its eventual worldwide adoption. The book assembles contributions from renowned world leaders in activated sludge research, development, technology and application. The objective of the book is to summarise the knowledge of all aspects of the activated sludge process and to present and discuss anticipated future developments. The book comprises invited papers that were delivered at the conference "Activated Sludge...100 Years and Counting!", held in Essen, Germany, June 12th to 14th, 2014. Activated Sludge - 100 Years and Counting is of interest to researchers, engineers, designers, operations specialists, and governmental agencies from a wide range of disciplines associated with all aspects of the activated sludge process. Authors: David Jenkins, University of California at Berkeley, USA, Jiri Wanner, Institute of Chemical Technology, Prague, Czech Republic.

Activated Sludge Wastewater Treatment

Activated Sludge Wastewater Treatment
Author: Eric Wahlberg
Publisher:
Total Pages: 530
Release: 1918-12-17
Genre:
ISBN: 9781605953335
GET BOOK

Download Activated Sludge Wastewater Treatment Book in PDF, Epub and Kindle

This book is a milestone in the evolution of wastewater treatment operations. It explains the science of treatment framed within an ethics where wastewater personnel are seen as protectors of public health, preservers of the environment, and stewards of public monies. Written by a former plant operator with a Ph.D., the book presents the fundamental science behind the unit processes in wastewater treatment plants, including biological nutrient removal. In so doing, it challenges longstanding operational doctrines enshrined by habit and tradition, such as being careful not to remove too many influent organics in a primary clarifier for fear of starving the microorganisms in the aeration basin, or using the MLSS concentration to control effluent quality, or cutting the growth rate of microorganisms in anticipation of their slower growth rate in winter. Dispelling much of the prevailing that's-the-way-we've-always-done-it dogma is achieved through an elegant and understandable presentation of the biology, chemistry, and physics that explain the phenomena of wastewater treatment. At the same time, the book is intensely practical. It offers detailed and data-based process control solutions to stabilize plant performance, maintain consistent effluent quality, and reduce energy costs. Powerful, easily implemented statistical techniques are given to unlock the meaning of plant performance data and make informed process control decisions. The book's approach is learning-focused, including numerous examples of a failsafe, foolproof arithmetical method that enables operations professionals to define, set up, and solve problems.

Activated Sludge and Aerobic Biofilm Reactors

Activated Sludge and Aerobic Biofilm Reactors
Author: Marcos Von Sperling
Publisher: IWA Publishing
Total Pages: 337
Release: 2007-03-30
Genre: Science
ISBN: 1843391651
GET BOOK

Download Activated Sludge and Aerobic Biofilm Reactors Book in PDF, Epub and Kindle

Activated Sludge and Aerobic Biofilm Reactors is the fifth volume in the series Biological Wastewater Treatment. The first part of the book is devoted to the activated sludge process, covering the removal of organic matter, nitrogen and phosphorus.A detailed analysis of the biological reactor (aeration tank) and the final sedimentation tanks is provided. The second part of the book covers aerobic biofilm reactors, especially trickling filters, rotating biological contractors and submerged aerated biofilters. For all the systems, the book presents in a clear and informative way the main concepts, working principles, expected removal efficiencies, design criteria, design examples, construction aspects and operational guidelines. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 6: Sludge Treatment and Disposal

Applications of Activated Sludge Models

Applications of Activated Sludge Models
Author: Damir Brdjanovic
Publisher: IWA Publishing
Total Pages: 472
Release: 2015-02-15
Genre: Science
ISBN: 1780404638
GET BOOK

Download Applications of Activated Sludge Models Book in PDF, Epub and Kindle

In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.

Industrial Wastewater Treatment by Activated Sludge

Industrial Wastewater Treatment by Activated Sludge
Author: Derin Orhon
Publisher: IWA Publishing
Total Pages: 405
Release: 2009-02-02
Genre: Science
ISBN: 1843391449
GET BOOK

Download Industrial Wastewater Treatment by Activated Sludge Book in PDF, Epub and Kindle

Industrial pollution is still a major concern and despite its significance, sound and systematic pollution control efforts are very poorly documented. The character and treatability of industrial wastewaters is highly variable and specific for each industrial activity. Biological treatment with activated sludge is the appropriate technology for industrial wastewaters from several major industrial sectors. Industrial Wastewater Treatment by Activated Sludge deals with the activated sludge treatment of industrial wastewaters by considering conceptual frameworks, methodologies and case studies, in a stepwise manner. The issues related to activated sludge treatment, such as biodegradability based characterization, modeling, assessment of stoichiometric and kinetic parameters and design, as well as the issues of industrial pollution control, e.g. in-plant control, effect of pretreatment, etc. are combined in a way to provide a comprehensive and information-rich view to the reader. By doing so, the book supplies an up-to-date reference for industrial wastewater experts and both graduate and undergraduate students. Industrial Wastewater Treatment by Activated Sludge provides a roadmap, describing the methodologies for the treatment of industrial wastewaters from several major sectors, based on a solid theoretical background. Up to now although valuable separate efforts both on activated sludge and industrial wastewater treatment have been presented, an integrated approach that is crucial to practice has not been available. This gap is filled by this book.

Activated Sludge Models

Activated Sludge Models
Author: The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment
Publisher: IWA Publishing
Total Pages: 132
Release: 2000-05-31
Genre: Science
ISBN: 9781900222242
GET BOOK

Download Activated Sludge Models Book in PDF, Epub and Kindle

This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9

Modeling of Activated Sludge Systems

Modeling of Activated Sludge Systems
Author: Derin Orhon
Publisher: CRC Press
Total Pages: 618
Release: 1997-07-15
Genre: Technology & Engineering
ISBN: 9781566761017
GET BOOK

Download Modeling of Activated Sludge Systems Book in PDF, Epub and Kindle

Activated sludge is the most vital wastewater process today. Now, this recent book provides a comprehensive guide to the modelling and design of activated sludge systems. Written by two leaders in the wastewater field, the book presents extensive and up-to-date coverage of all areas in the activated sludge process microbiological basis, reactor kinetics, and design methodologies. The book is organized for easy reference and is ideal as a text or desktop guide.

Guidelines for Using Activated Sludge Models

Guidelines for Using Activated Sludge Models
Author: Leiv Rieger
Publisher: IWA Publishing
Total Pages: 287
Release: 2012-09-14
Genre: Science
ISBN: 1843391740
GET BOOK

Download Guidelines for Using Activated Sludge Models Book in PDF, Epub and Kindle

Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22

The Microbiology of Activated Sludge

The Microbiology of Activated Sludge
Author: Robert J. Seviour
Publisher: Springer Science & Business Media
Total Pages: 433
Release: 2012-12-06
Genre: Science
ISBN: 9401139512
GET BOOK

Download The Microbiology of Activated Sludge Book in PDF, Epub and Kindle

This book has been a long time in preparation. Initially it grew out of our frustrating attempts over the past ten years to identify the filamentous bacteria seen in large numbers in most activated sludge plants, and the realization that we know very little about them and the other microbial populations in these systems. Unfortunately this book does not provide many answers to the problems these filamentous bacteria can cause, but we hope it might encourage microbiologists and engineers to communi cate more with each other and to spend some time trying to understand the tax onomy, ecology and physiology of activated sludge microbes. It is now very timely, for example, to try to provide these filamentous bacteria with proper taxonomically valid names and to determine their correct place in bacterial classifications. This book is not meant to compete directly with the books by Gray (1989, 1990) nor the excellent manual published by Jenkins and coworkers (1993b), which has been invaluable to us and others trying to identify filamentous bacteria. Wanner's book (1994a) also provides an excellent account of the problems of bulking and foaming caused by filamentous bacteria. These publications and others by Eikelboom's group have made an enormous contribution to the study of filamentous bacteria, and will con tinue to do so.

Respirometry in Control of the Activated Sludge Process

Respirometry in Control of the Activated Sludge Process
Author: Henri Spanjers
Publisher: IWA Publishing
Total Pages: 202
Release: 1998-01-01
Genre: Science
ISBN: 1900222043
GET BOOK

Download Respirometry in Control of the Activated Sludge Process Book in PDF, Epub and Kindle

Ebook only (available soon) The report describes the principles of measurement of respiration rate, the transformation of measurement data into other types of information, and the application of the obtained information in process control strategies. Some fundamental concepts on biological respiration and process control are provided to assist the reader with understanding the principles. A structured overview comprises some eighty control strategies in which respirometry plays a role. To enable the reader to consult the information sources, an extensive literature list of over 500 references in included and classified into six themes. Contents Fundamentals of Respiration Measuring Principles Measured and Deduced Variables Elementary Control Concepts Respirometry in Control of the Activated Sludge Process Summary and Perspectives. Scientific and Technical Report No.7 Also Available Respirometry in Control of the Activated Sludge Process: Benchmarking Control Strategies